cleaning uggs Legit ReviewsOutside of the MAGNUM M8 Case
The front of the case is split with the left side being slightly larger making the button panel offset from dead center. The left side is what is called the Bay area and supports up to 10x 5.25 devices. By default the MAGNUM M8 has two 3 bay panels and four single bay panels installed. However if you do order some of the Flex Bay options they will be pre installed at the factory replacing the blank panels. We will cover this in more detail on the options page. The right side has a single 120mm fan port and plates covering two more 120mm ports. The center by default has a power and reset button that glow blue and red, respectively when the power is on or there is drive activity. These are standard black Lamptron momentary vandal switches at 22mm top and 16mm bottom so you can replace them with other colors if you choose.
The back of the case reveals more options on the Case Labs MAGNUM M8. Starting from the left there is the option for dual power supplies if redundancy is important or you simply put that much cooling, lighting, hard drives, or graphics cards in the case requiring more than what a single PSU can handle. We are not sure how often this would be required but nice if you ever needed it. This also gives you the option to move the PSU higher up or lower down depending on how you want to run cables or install options. Also note the reversible screw patterns allowing you to mount your PSU bottom facing out or top facing out.